Iron: Hematite, magnetite ores such as otal Fe, FeO, Fe2O3, Fe3O4, metalic Fe, SiO2, Al2O3, P, S analysis is carried out. Complete analysis resulted in an average of 2 to 3 days. This period may be shortened to be made only chromium analysis.

Chrome: the cr2o3.feo chromite ore Cr2O3, FeO, SiO2, MgO, CaO, P, S, C \ FE analysis is carried out. Complete analysis resulted in an average of 2 to 3 days. This period may be shortened if only chromium analysis is requested.

Zinc: Besides Zn analysis of elements such as S, Pb, P are done. The result is obtained within 2 -3 days.

Marble: CaCO3, MgCO3, CaO, Al2O3, Fe2O3 and SiO2 performed chemical analyzes of mineral oxides. In addition to the marble in fire losses (the loss on ignition) is checked.

Manganese: In this ore Mn, Fe, SiO2, Al2O3, P, S are analyzed. Complete analysis time for analysis is approximately 2 to 3 days. It can result in less time for a single Mn.

Copper: Copper is carried out with international standards analysis. The result is obtained within 2 days.

Lead: Zn, S is analyzes besides Pb. Lead is a longer process step in the analysis of lead alone, the result is obtained within 2- 3 days. Our customers need to consider the situation.

Refined sulfur: moisture, ash are made as purity analysis. The results are received average within 3 days .

Feldspar, kaolin, silica sand, clay: SiO2, Al2O3, Fe2O3, CaO, MgO, such analysis is performed. The average result is obtained within 2-3 days.

Dolomite, limestone (Limestone): CaO, MgO, SiO2, Al2O3, Fe2O3 are analyzed. The results are given maximum within 3 days.

Bauxite: Al2O3, SiO2, Fe2O3, L.O.I. such analysis is done. Average results are given in 2 to 3 days as other analyzes.

Lime: CaCO3, L.O.I. , Al2O3, SiO2, Fe2O3 are analyzed. Analysis time is approximately 2-3 days.

Ferros: Ferrochrome Cr, Si, C, P; Ferro Manganese Mn, Si, C, P; Ferrosilicon Si, Al, C, P analysis is carried out. Analysis time is approximately 2-3 days.

Coal: Total moisture, volatile matter, ash, calories, sulfur analyzes are conducted. The results are given a maximum of 4 days.in addition, the analysis is carried out as calcite and magnesite.

All sample analyzes are done in accordance with national and international standards and methods. 

We kindly request and inform our customers that:
• Sampling belongs to the customer. 
• Customers must ensure to bring the actual representative of the sample to be analysed. 
• Enough and homogeneous samples should be sent for analysis. 
• Specimens owdered 300-400 gr should be in sealed bags. if moisture and moisture determination if requested the sample should be tightly closed. And it must be sent to our laboratory to ensure that moisture does not leak out. 
• The witness samples are stored in our laboratory for two months. In the form of laboratory analyzes required demand analysis, customer code, customer information, etc. filled .Therefore sample should be sent a with the filled in form. The original copy of the analysis report and the bill can be achieved or mailed to the address contained in this form. The analysis will be started after the receipt of the fees specified in the fax. 
Please do not hesitate to contact us by telephone or e-mail, for your queries and other analyzes.